Loading ...
Loading ...
Loading ...
18
Logging button on the diagnostic toolbar is available throughout the whole
Diagnostics operations.
2. Tap the Data Logging button. The button displays blue during the active
recording process.
3. Tap the Data Logging button again to end recording. A submission form will
display to let you fill in the report information.
4. Tap the Send button to submit the report form via the Internet. A confirmation
message displays when sending is successful.
Status Information Bar
The Status Information Bar at the top of the Main Section displays the following items:
Menu Title — indicates the menu subject of the Main Section.
Voltage Icon — indicates the voltage status of the vehicle.
Main Section
The Main Section of the screen varies depending on the stage of operations. The Main
Section can show vehicle identification selections, the main menu, test data, messages,
instructions, and other diagnostic information.
Function Buttons
The displayed Function Buttons at this section of the screen vary according to the stage
of operations. They can be used to navigate, save or clear the diagnostic data, exit
scanning as well as make other functional controls. The functions of these buttons will
be introduced respectively in the following sections of the corresponding test operations.
Screen Messages
Screen messages appear when additional input is needed before proceeding. There are
mainly three types of on-screen messages as to their purposes: Confirmation, Warning,
and Error.
Confirmation Messages
Confirmation messages usually display as an “Information” screen, which inform you
when you are about to perform an action that cannot be reversed or when an action has
been initiated and your confirmation is needed to continue.
When a user-response is not required to continue, the message displays briefly before
automatically disappearing.
Warning Messages
Warning messages inform you when completing the selected action may result in an
irreversible change or loss of data. The typical example for this is the “Erase Codes”
message.
Loading ...
Loading ...
Loading ...