Loading ...
Loading ...
Loading ...
Drilling
Make sure switch turns drill on and off.
drill bit from slipping out of it.
but not so much as to stall the motor or deflect the bit.
Hold the drill firmly with both hands to control its twisting action (figure A).
last part of the hole.
Drilling In Wood
Holes in wood can be made with the same twist drill bits used for metal or with spade bits.
from the flutes.
Drilling In Metal
Troubleshooting
Problem Possible Cause Possible Solution
outlet.
depressed in desired direction. the left or right.
(If the product repeatedly
causes the circuit fuse to
blow, discontinue use
immediately and have it
serviced at a
service center or
authorized servicer.)
(If the product repeatedly
to trip, discontinue use
immediately and have
it
serviced at a
service center or
authorized servicer.)
switch replaced at
Service Center or
Authorized Servicer.
For assistance with your product, visit our website www.blackanddecker.com for
the location of the service center nearest you or call the help line at
1-800-544-6986.
Loading ...
Loading ...
Loading ...