Loading ...
Loading ...
Loading ...
Operating Instructions
WARNING: To reduce the risk of serious personal injury, read, understand and
follow all safety warnings and instructions prior to using tool.
WARNING: It is important to support the work properly and to hold the drill
firmly to prevent loss of control which could cause personal injury. If you have any
questions on how to properly operate tool, call: 1-800-544-6986.
WARNING: Do not attempt to tighten drill bits (or any other accessory) by
gripping the front part of the chuck and turning the tool on. Damage to the chuck
and personal injury may occur when changing accessories.
WARNING: To reduce the risk of injury, always unplug drill from power supply
before making any adjustments or changing accessories.
WARNING: To reduce the risk of injury, let the tool work at its own pace. Do not
overload.
Selecting the direction of rotation
WARNING: Never change the direction of rotation while the motor is running.
Models DR260, DR340
Model DR560
Switching on and off
how far you press the switch.
continuous operation, press the variable speed switch once more and release it.
WARNING:
plugged in.
Built-in level (DR260, DR340)
level holes.
bubble floats in the center of the parallel lines drawn on the glass.
in
figure G, the drill is level.
two will be aligned. (Any bubble level can only indicate level
relative to the earth.)
NOTE:
If
a
physician immediately.
G
6
Loading ...
Loading ...
Loading ...