Loading ...
Loading ...
Loading ...
Leave the appliance to stand for one hour after transport or after the unit has been on its side before
connecting it to the mains supply to let the refrigerant settle.
Ensure all external windows and doors are closed before turning on the unit.
Ensure that the water container is positioned correctly.
OPERATION
Plug into power supply and switch on at the mains. When plugged into power socket, 3 beep signals will
be heard.
2. Press the “ON/OFF” button to turn on the unit. The louvre opens automatically and the unit goes into
the default mode of continuous dehumidification and mid speed running.
The LCD display shows the ambient humidity and temperature (the variation of relative humidity can be
5%).
To turn off, press the “ON/OFF” button again; the dehumidifier will stop working and the louvre will
close.
DEHUMIDIFY
Press the key “〈” or “〉”to choose your humidity setting. You can choose the continuous
dehumidification option or your preferred humidity required in the range of 50-70%.
When the machine is set in automatic dehumidification, the desired humidity setting and fan Speed is
indicated on the LCD display.
When ambient humidity is 5% lower than your setting, compressor shuts off and fan works at low speed.
If ambient humidity is 5% higher than the setting, the dehumidification is activated again.
When the machine is set in continuous dehumidification, the continuous dehumidification mode and
corresponding fan speed will be displayed on LCD. In this mode, the ambient humidity has no effect on
the operation of the dehumidifier.
In automatic dehumidification mode (50%RH, 60%RH, 70%RH), or continuous dehumidification mode
press “Speed” to select the fan speed either “Mid speed” or “Low speed”.
When in dry mode, you cannot adjust the humidity setting. You need to come out of the dry mode to set
desired humidity.
SPEED
Press this key to select the fan speed at “mid speed” level or “Low speed”.
In automatic dehumidification mode or continuous dehumidification mode, press “Speed” to select the
fan at “Mid speed” or “Low speed”.
In dry mode, you cannot select the fan mode. It runs in high speed by default.
When in automatic defrost, the fan works at “Mid speed”.
When the sensor detects ambient temperature exceeding 32°C, it automatically moves to “Mid speed”
and when sensor detects ambient temperature lower than 30°C, it returns back to previous speed
setting.
Operating your Appliance
Loading ...
Loading ...
Loading ...