Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/33068691-an-1171/bgf.png)
— 15 —
u
Unplug the unit from the AC outlet.
v
Remove ve screws from the light panel, then
remove the light bulbs by popping them out.
w
Disconnect the light clip.
x
Reverse the removal procedures to install the new
light bulbs and plug the unit back in.
Be sure electrical power is off and all surfaces are cool
before cleaning or servicing any part of the hood.
Range Hood Body
• Do not use a steel wool pad; it will scratch the surface.
• To clean the stainless steel surface, use warm soapy
water or a stainless steel cleaner. Closely follow the
cleanser label instructions. DO NOT use corrosive or
abrasive detergents, ammonia products, abrasives or
oven cleaners. Always wipe the surface in the direction
of the grain.
Filters
• The saturation of greasy residue in the fan and lters
maycauseincreasedinammability.Keepunitclean
and free of grease and residue build-up at all times to
prevent possible res.
• Filters can be cleaned in a standard dishwasher or by
using a mild cleaner. DO NOT use corrosive or abrasive
detergents, ammonia products, or oven cleaners.
• To remove, rst drain and wipe all excess grease with
adrypapertowel.Graspthebafelterknobsandpull
them up, forward and out.
Maintenance
Replacing the Light Bulbs Cleaning the Range Hood
• When cleaning is completed, replace the lters as
shown in Step 14.
Loading ...