Loading ...
Loading ...
Loading ...
32
SETTING OVEN CONTROLS
Figure 6: Clean around the oven door gasket
Important notes:
• Completely remove all oven racks and any
accessories from oven cavity to avoid damage
to oven racks. If the oven racks are not
removed they may discolor.
• Remove all items from the oven and cooktop
including cookware, utensils, and any aluminum
foil. Aluminum foil will not withstand high
temperatures from a self clean cycle and will
melt.
• Do not spray oven cleaners or oven protective
coatings in or around any part of the oven
interior. Clean any soil from the oven frame, the
door liner outside the oven door gasket, and
the small area at the front center of the oven
bottom (Figure 6). These areas heat suciently
to burn soil on. Clean using soap and water
prior to starting Self Clean.
• Remove any excessive spills. Any spills on the
oven bottom should be wiped up and removed
before starting a self clean cycle. To clean use
hot, soapy water and a cloth. Large spills can
cause heavy smoke or fire when subjected to
high temperatures.
• Do not allow food spills with high sugar or acid
content (such as milk, tomatoes, sauerkraut,
fruit juices, or pie fillings) to remain on the
surface as they may leave a dull spot even after
cleaning.
• Do not clean the oven door gasket. The woven
material in the gasket is essential for a good
seal. Care should be taken not to rub, damage,
or remove the oven door gasket. Doing so
could cause damage to the door gasket and
compromise the performance of the oven.
• The kitchen area should be well ventilated
using an open window, ventilation fan, or
exhaust hood during the first self clean cycle.
This will help eliminate the normal odors.
• Do not attempt to open the oven door when
the OVEN LOCK indicator light is flashing.
Allow about 15 seconds for the motorized door
latch mechanism to completely lock or unlock
the oven door.
• When the clean time finishes, the oven door
will remain locked until the range has cooled
suciently. In addition to the clean time that
was programmed, you must allow about 1
additional hour for the oven to cool before you
will be able to open the oven door.
Loading ...
Loading ...
Loading ...