Loading ...
Loading ...
Loading ...
8
English
• Only attach tool to a lanyard with a locking carabiner. Do not attach
by looping or knotting the lanyard. Do not use rope or cord.
• Electrical shock hazard. Be sure power is off when working in high
voltage areas. Some lanyards are conductive.
• Dropped tools will swing on the lanyard, which could cause injury
or loss of balance.
• Do not carry the tool by attachment device or the lanyard.
• Do not attach more than one tool to each lanyard.
• Only use appropriate
DEWALT brand attachment point. NEVER
modify tools to create attachment points.
• Only transfer the tool between hands while properly balanced in a
stable orientation.
• Do not attach lanyards to tool in a way that keeps guards,
switches or lock-offs from operating properly.
• Avoid getting tangled in the lanyard.
• Keep lanyard away from the cutting area of the tool.
• Do not use lanyards or attachment devices to get additional
leverage from the tool.
• Do not use for personal fall protection.
• Falling object hazard! Only change accesories and attachments
where a dropped object won't cause a hazard below you. Consult
your AHJ or site supervisor for procedures for working at height.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Minimum Gauge for Cord Sets
Ampere Rating
Volts Total Length of Cord
in Feet (meters)
120 V 25
(7.6)
50
(15.2)
100
(30.5)
150
(45.7)
240 V 50
(15.2)
100
(30.5)
200
(61.0)
300
(91.4)
More
Than
Not
More
Than
AWG
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
SAFETY WARNINGS SPECIFIC FOR USE AT HEIGHT
(DWE4222N ONLY)
• Always keep the tool and accessories tethered when working "at
height". [Maximum lanyard length: 6.5 ft (2m)]
• Use only with lanyards appropriate for this tool type and rated for
at least 6.0 lbs (2.72 Kg).
• Crush, cut or entanglement hazard. Do not use near moving
parts, mechanisms or running machinery.
• Do not anchor the tool lanyard to anything on your body. Anchor
to a rigid structure that can withstand the forces of a dropped tool.
• Make sure the lanyard is properly secure at each end prior to use.
• Inspect tool and lanyard before each use for damage and proper
function (including fabric and stitching). Do not use if damaged or
not functioning properly.
• Do not alter the lanyard connection or use in a manner other than
as instructed in this manual.
Loading ...
Loading ...
Loading ...