Loading ...
Loading ...
Loading ...
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Note
●
This function is available only while G-
SHOCK Connected is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
●
A
Install the app on your phone.
In Google Play or the App Store, search for the
CASIO “G-SHOCK Connected” app and
install it on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “G-SHOCK Connected” icon.
3.
X
Hold down (C) for at least 1.5 seconds.
Release the button when [CNCT] starts to
flash.
4.
Y
Perform the operation shown on the
screen of the phone to be paired with.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing and the second hand will
move from [READY] to [CONNECT].
●
If pairing fails for some reason, [ERR]
will appear on the display momentarily
and then the watch will return to the
mode it was in before you started the
pairing procedure. Perform the pairing
procedure again from the beginning.
Pairing complete.Pairing started.
Note
●
The first time you start up G-SHOCK
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
1.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (D) for at
least two seconds to enter the
Timekeeping Mode.
2.
X
Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3.
X
Press (D) 14 times.
This displays [RCV].
4.
X
Press (E) to toggle between the auto
time adjustment settings.
[OFF]: Auto time adjustment disabled.
[ON]: Auto time adjustment enabled.
5.
X
Press (A) to exit the setting screen.
Note
●
The auto time adjustment setting can
be changed only while the watch is
paired with a phone.
Operation Guide 5631
5
Loading ...
Loading ...
Loading ...