Loading ...
Loading ...
Loading ...
Configuring Power Saving
Function Settings
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) 15 times.
This displays [P.SAVE].
4. Press (E) to toggle between ON and OFF.
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
5. Press (A) to exit the setting screen.
Note
●
For details about Power Saving, refer
to the information below.
l
Power Saving Function
Resetting Watch Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Stopwatch
●
Timer
●
Alarm
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) twice.
This causes the seconds to flash.
Seconds
4. Hold down (B) for at least five seconds.
Release it when [RESET] stops flashing.
5. Press (A) to exit the setting screen.
Note
●
Resetting the watch will also delete
information for pairing the watch with a
phone, and unpair them.
Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
●
Before Boarding
1. Configure the World Time to the current
time at your destination.
Destination time
Current time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2. Disable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
●
After Arriving
1. Swap the origin time zone time with the
destination time zone time.
Destination time
Destination time
After swapping
Before swapping
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2. Enable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
3. Adjust the time setting.
l
Triggering Immediate Time Adjustment
Operation Guide 5631
18
Loading ...
Loading ...
Loading ...