Loading ...
Loading ...
Loading ...
21
INSTALLATION
ENGLISH
When connecting to a waste spigot, use the
band clamp
c
to the end of the short drain
hose.
CAUTION
• Adjust the wire hose clamp to prevent the hose
from coming loose or leaking. Failure to do so
could result in flooding. Use of the drain hose
connector helps avoid siphoning, odours, or
improper draining.
• Make sure the drain hoses are not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
• Depending on the installation environment, you
may have to purchase a separate drain hose
connector. The connector supplied will suit a
standard laundry tub side drain hole.
• Use the elbow bracket (included) if necessary.
When installing the drain hose to a sink, secure it
tightly with string.
Levelling the Appliance
Checking the Level
When pushing down the edges of the top plate
diagonally, the appliance should not move up and
down at all (check both directions).
• If the appliance rocks when pushing the top
plate of the appliance diagonally, adjust the feet
again.
• Check whether the appliance is perfectly level
after installation.
105 cm
105 cm
Loading ...
Loading ...
Loading ...