Loading ...
Loading ...
Loading ...
19
INSTALLATION
ENGLISH
cloth. Do not overtighten the supply hose with any
mechanical device.
NOTE
• After connecting the water inlet hose to the
water tap, turn on the water tap to flush out
foreign substances (dirt, sand, sawdust, and etc.)
in the water lines. Let the water drain into a
bucket, and check the water temperature.
Connecting the Hose to the
Appliance
1
Screw the supply hose to the water inlet valve
on the back of the appliance.
• Do not connect cold and hot water supply
hoses in reverse.
NOTE
• After completing connection, if water leaks from
the hose, repeat the same steps. Use the most
conventional type of tap for the water supply. In
case that the tap is square or too big, remove the
guide plate before inserting the tap into the
adaptor.
• Make sure that the hose should not be kinked or
trapped.
Installing the Drain Hose
Connecting the Drain Hose to
the Dryer
1
Remove the stamped area on the middle of the
bracket to make an opening for the drain hose
of the dryer.
2
Insert the hose clamp
a
onto the drain hose of
the dryer.
3
Connect the drain hose of the dryer and secure
the hose clamp.
COLD HOT
Loading ...
Loading ...
Loading ...