Toyotomi KURO TKN/TKG-628R32

User Manual - Page 15

For KURO TKN/TKG-628R32.

PDF File Manual, 140 pages, Read Online | Download pdf file

KURO TKN/TKG-628R32 photo
Loading ...
Loading ...
Loading ...
GB
15
NOTE:
,may not be available. When air conditioner receives this signal, the air
conditioner will blow fan automatically.
Press this button continuously more than 2s, the main unit will swing back and forth from
up to down, and then loosen the button. The unit will stop swinging and present position
of guide lover will be kept immediately.
Under swing up and down mode, when the status is switched from off to
, if press this
button again 2s later,
status will switch to off status directly. lf press this button again
within 2s, the change of swing status will also depend on the circulation sequence stated
above.
8 SLEEP button
In the Cooling or Heating mode, press this button to start Sleep mode. Once you set
it up, this symbol appears on the screen remote control. Sleep Mode has
three places to choose from, Sleep Mode 1, Sleep Mode 2, Sleep Mode 3. To navigate
through the options, press the sleep button. By pressing it once Sleep Mode 1
will be activated, by pressing it twice Sleep Mode 2 activates, three times
Sleep Mode 3 activates. Pressing the button for the fourth time will disable this
function and “ will disappear. If you deactivate the air conditioner, sleep mode
will be deactivated. During DRY, FAN, AUTO, Energy Saving & “8°C Heating” functions,
Sleep mode is not available.
Sleep Mode 1
Sleep Mode 1 is available in Cooling or Heating mode. By activating this
function, the air conditioners temperature increases by one degree per hour in
“Cooling mode and decreases by one degree per hour in “Heating” mode.
Sleep Mode 2
Sleep mode 2 will only be activated during Cooling or Heating mode.
During Cooling:
-If the air conditioner temperature is set between 16°C - 23°C, the temperature will increase
by one degree per hour for the next 3 hours after the power is turned on and then
remains stable. At the 8th hour after the operation is switched on, the temperature will be
reduced by one degree automatically
- If the air conditioner temperature is set between 24°C - 27°C, the temperature will increase
by one degree per hour for the next 2 hours from the start of the operation and
then remain stable. At the 8th hour after the operation is switched on, the temperature
will be reduced by one degree automatically.
INTRODUCTION FOR BUTTONS ON REMOTE CONTROLLER
Loading ...
Loading ...
Loading ...