Loading ...
Loading ...
Loading ...
GB
14
5
/ button
• Press “ ” or “ ” button once increase or decrease set temperature 1C (°F).
Holding “ ” or “ ” button, 2s later, set temperature on remote controller will
change quickly. On releasing button after setting is finished, temperature indicator on
indoor unit will change accordingly.
• When setting TIMER ON, TIMER OFF or CLOCK, press “ ” or “ ” button to adjust time.
(Refer to CLOCK, TIMER ON, TIMER OFF buttons) When setting TIMER ON, TIMER OFF or
CLOCK, press “ ” or “ ” button to adjust time. (Refer to CLOCK, TIMER ON,
TIMER OFF buttons).
6 button
Press this button can select left & right swing angle. Fan blow angle can be selected
circularly as below:
NOTE:
• Press this button continuously more than 2s, the main unit will swing back and forth from
left to right, and then loosen the button, the unit will stop swinging and present position
of guide louver will be kept immediately.
• Under swing left and right mode, when the status is switched from off to
, if press this
button again 2s later status will switch to off status directly; if press this button again
within 2s, the change of swing status will also depend on the circulation sequence stated
above.
7
button
Press this button can select up & down swing angle. Fan blow angle can be selected
circularly as below:
• When selecting
, air conditioner is blowing fan automatically. Horizontal louver will
automatically swing up & down at maximum angle.
• When selecting “
” , air conditioner is blowing fan at fixed position.
Horizontal louver will stop at the fixed position.
• When selecting ”
” , air conditioner is blowing fan at fixed angle. Horizontal
louver will send air at the fixed angle.
• Hold
button above 2s to set your required swing angle. When reaching your required
angle, release the button.
no display
(stops at current position)
No display
(horizontal louvers stops
at current position)
Loading ...
Loading ...
Loading ...