Loading ...
Loading ...
Loading ...
Function and Features
Copyright ©ITECH Electronic Co., Ltd. 26
Standards for 24V system:
How to recall “Starting Profile” waveform from menu (take 12V system as a example):
1. Press + (Menu) to enter the menu operations
2. VFD displays SYSTEM CONFIG FUNC. INFO,Press to select FUNC.Press
to confirm,then press to select ISO16750-2,press to confirm.
3. press or to select Starting profile,press to confirm.
4. Press or to select 12V/24V；
5. Press to select level (12V: 1-4) / (24V:1-3) ；
6. Press to select Repeat,press to confirm,”Count= 1” item is used to set the
cycle times (1-100) ,press to confirm.
7. Press to select Delay,set delay time,press to confirm,Delay=
0.01.Adjustable delay time range is 0.01s-100.00s.
8. Press to select ON,press to confirm.The Trig indicator lamp will be lit
and display on the VFD.
9. Press
to quit menu operations.
10. VFD will display Starting profile in the lower right corner.
11. Press button to turn on the output.
12. Press
+ (Trigger)to generate a trigger signal.The Starting profile will
output as standard.
3.10 Protection Function
IT6512 has provided with OVP,OCP,OPP,OTP functions.
You could set the over voltage protection value by press button.Many reasons could
cause a over voltage error.For example, caused by internal defect,misoperation,or too high
Enter
Enter
Enter
Enter
Enter
Enter
Enter
On/Off
EnterEnter
Loading ...
Loading ...
Loading ...