User Manual
Color Bulb
www.switch-bot.com
V1.2-2109
Firmware and Factory Reset
Firmware
Make sure you have the up-to-date firmware
by upgrading in time.
Factory Reset
Turn the bulb on and off 8 times continually (wait
for 2 seconds for each turning on and off), until
the bulb is in breathing mode and turns white.
Note: After resetting the device, all settings will resume back
to default values.
• Compatible with regular light switches. Not
suitable for use with standard in-wall dimmers.
Not compatible with photosensors, motion
sensors, or timers. Dimmable via the app only.
• NOT for use in totally enclosed or recessed
luminaires.
• Do not look directly at the bulb when it's
on, as this may cause visual damage.
• NOT FOR EMERGENCY LIGHTING.
• Operating Temperature: -15 °C to 40 °C
(5 °F to 104 °F)
• Storage Temperature: -20 °C to 50 °C
(-4 °F to 122 °F)
• Operating Humidity: 10 % to 80 % RH,
Noncondensing
• Storage Humidity: 0 % to 80 % RH,
Noncondensing
Safety Information
• To avoid the risk of electric shock and burn,
please turn off the power supply and wait
for the bulb to cool down when installing,
removing or cleaning.
• Do not install the Color Bulb with wet hands
or when standing on wet or damp surfaces.
• Compatible with regular light switches. Not
suitable for use with standard in-wall dimmers.
• Not compatible with photosensors, motion
sensors, or timers.
• Dimmable using the app only.
• Do not disassemble or transform. The LED
components cannot be replaced.
• Never wash with water.
• There is deviation in LED components, even
for the same type of products, the light color
and brightness may vary.
• Maintenance method: please wipe it with
dry cloth.
Package Contents
• Bulb
• User Manual
Note: The graphics used in this
manual are for reference only.
Due to the future updates and
improvements of the product,
the actual product images may
differ.
Attention:
• Before you install the Color Bulb, please
confirmyou have switched off the bulb that
you need to replace.Then remove the old one
to replace the Color Bulb.
• Use in dry places only.
• Avoid usingmetal lamp shades, this will
damage ColorBulb's wifi signal strength.
• Avoid usingoriginaldimmer switchesto control
ColorBulb, itmay cause failure in control.
• Avoid usingoriginalwall switchto power off
Color Bulb, it will cut off its network connection.
Getting Started
Power on the Bulb.
1
Open the SwitchBot app and sign in.
2
Tap the "+" icon on the top right of the
Home page.
3
Tap the "Bulb" icon and follow the
instruction to complete the setup.
4
Preparation
A smartphone or tablet with Bluetooth 4.2 or
above
System Requirements: Android 5.0 or above,
iOS 10 or above
Download the SwitchBot app
Create a SwitchBot account and sign in
Loading ...
Loading ...
Loading ...
