Loading ...
Loading ...
Loading ...
Measuring a Split Time
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
A
C
C
A
Stop
Split release
Split
Start
Hours
Minutes, seconds, 1/10 seconds
3. Press (C) to reset the measurement time
to all zeros.
Timing the First and Second
Place Finishers
1. Enter the Stopwatch Mode.
l
Navigating Between Modes
2. Use the operations below to measure
elapsed time.
A
C
A
2nd Finisher*
1st Finisher*
Start
* Displays the time of the first finisher.
Hours
Minutes, seconds, 1/10 seconds
3. Press (C) to display the time of the second
place finisher.
4. Press (C) to reset the measurement time
to all zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
●
The beeper will not sound if battery power
is low.
Setting a Start Time
The countdown start time can be set in 1-
minute units up to 24 hours.
1. Enter the Timer Mode.
l
Navigating Between Modes
2. Hold down (E) for at least two seconds.
Release the button when the hour setting
starts to flash.
Hours
3. Use (A) and (C) to change the timer hours
setting.
●
Holding down (A) or (C) scrolls through
settings at high speed.
4. Press (D).
This causes the minutes digits to flash.
Minutes
Watch Operation Guide 3553
32
Loading ...
Loading ...
Loading ...