Loading ...
Loading ...
Loading ...
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Use (A) and (C) to scroll through the alarm
([AL-1] to [AL-4], [SNZ]) and hourly time
signal (
) screens until the one you want
to turn off is displayed.
Alarm number or hourly time signal
3. Press (B) to turn off the displayed alarm or
the hourly time signal.
●
Each press of (B) toggles between on
and off.
●
Turning off all alarms causes
(alarm) to disappear from the display.
Turning off the hourly time signal
causes (hourly time signal) to
disappear.
Note
●
If (alarm) is still displayed after
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the
(alarm) indicator is no longer
displayed.
Digital Compass
You can use the compass function to
determine the direction of north, and to
check your bearing to a destination.
Important!
●
Check the information at the link below
to find out how to ensure correct
readings.
l
Calibrating Compass Readings
l
Digital Compass Reading
Precautions
Taking a Compass Reading
1. Enter the Compass Mode.
l
Navigating Between Modes
●
Entering the Compass Mode starts
compass readings.
2. Keeping the watch horizontal, point 12
o’clock in the direction of your desired
objective.
The digital display shows one of 16 literal
direction indications and the bearing
angle.
●
To retrigger the compass operation,
press (C).
Interpreting Bearing Readings
Directions: N (North), E (East), W (West), S
(South)
315°
0°
Bearing angle
Bearing angle to objective
Bearing to objective
North
Graphic direction pointer
Objective
●
The graphic direction pointer indicates
north, south, east, and west. The graphic
direction pointer indicating north consists of
three lines.
Graphic direction pointer (north)
West
South East
Watch Operation Guide 3553
17
Loading ...
Loading ...
Loading ...