Loading ...
Loading ...
Loading ...
PowerXL
™
Boost Blender Plus
™
9
Instructions for Use
Using the
Boost Function
IMPORTANT: The appliance should
always have its lid in place when in use.
CAUTION: Do not place the blender
jar onto the base when the motor
isrunning.
1. Make sure the appliance is OFF.
2. Place the food to be blended
into the jar. For best results, place
ingredients in jar in the following
order: liquids, powders, soft
foods, hard foods, ice.
NOTE: You must always add a
liquid before blending.
3. Place the lid on the jar. Make sure
the pour spout and ingredient
slot are closed.
4. Plug the power cord into an
electrical outlet.
NOTE: When in use, do not
leave the blender unattended.
When using hard foods, such as
ice or cheese, keep one hand
on the lid to keep the blender
inplace.
5. Select the speed that best
suits your desired task (see the
“Speed Chart” section).
6. When blending thick mixtures,
such as smoothies and
milkshakes, press the high pulse
The blades can reach up through an air
pocket into the ingredients above. This
allows the blending vortex to reestablish.
If an air pocket is persistent, add liquid.
Press down on the lid to raise the
bladeheight and clear jams.
Using the Boost Blender Plus
™
Instructions for Use
button for several seconds and
then release. Repeat until the
food has desired consistency.
NOTE: Use the pulse function
for no more than ve seconds at
a time, allowing the blender to
rest briey between each pulse—
no more than two minutes total.
This helps break up the ice and
distribute the ingredients.
7. Open the ingredient slot to
addingredients while the
blender is running. Drop
ingredients through the opening.
If air pockets or clogs form in the
mixture, press down on the lid to
break them up. This lowers the
jar and raises the blades within
the mixture (see the “Using the
BoostFunction” section).
IMPORTANT: Do not remove the
lid while the blender is running.
8. When nished, press the off
button. Make sure the blades
have completely stopped before
attempting to remove the
blending jar from the base.
9. To remove the jar, grasp the
handle, turn jar counterclockwise,
and lift up. NOTE: Always unplug
the appliance when not in use.
Loading ...
Loading ...
Loading ...