Loading ...
Loading ...
Loading ...
8ENGLISH
Lighting up the front lamp
When you turn on the tool by pressing the main power
switch, the lamp lights up. When you turn o the tool by
pressing the main power switch, the lamp goes out.
2
1
► 1. Lamp 2. Main power switch
CAUTION: Do not look in the light or see the
source of light directly.
NOTICE: When the tool is overheated, the lamp
blinks. Turn the tool o and let the tool cool down
fully before operating the tool again.
NOTE: Use a dry cloth to wipe the dirt o the lens of
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
Storing adapter
The adapters can be stored in the adapter holder of the
tool. Insert the sport ball needle into the Presta valve
adapter before attaching them to the adapter holder.
12
34
► 1. Sport ball needle 2. Presta valve adapter
3. Adapter holder 4. Tapered adapter
Storing hose
The hose can be attached to the hose holder of the tool.
2
1
► 1. Hose holder 2. Hose
Air release button
NOTICE: While the English valve adapter is
attached to the tool, the air does not go out even
when you press the air release button.
When the object is inated too much, press the air
release button to release air.
1
► 1. Air release button
Loading ...
Loading ...
Loading ...