Loading ...
Loading ...
Loading ...
6 — English
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates a hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING:
Indicates a hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a hazardous situation, that, if not avoided, may result in minor or
moderate injury.
NOTICE:
(Without Safety Alert Symbol) Indicates information considered important, but
not related to a potential injury (e.g. messages relating to property damage).
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s
Manual
To reduce the risk of injury, user must read and understand operator’s manual
before using this product.
Eye & Breathing
Protection
Always wear eye protection with side shields marked to comply with ANSI
Z87.1 along with breathing protection.
Keep Bystanders
Away
Keep all bystanders at least 50 ft. away.
Slippery Surface Exercise caution to avoid slipping or falling.
Wet Conditions
Alert
Risk of fire and burns. Do not expose battery, battery compartment, or elec-
tronic components to rain, water, or liquids. Close cover during use.
Risk of Injection
To reduce the risk of injection or injury, never direct a water stream towards
people or pets or place any body part in the stream. Leaking hoses and fit-
tings are also capable of causing injection injury. Do not hold hoses or fittings.
Risk of Explosion
Do not spray flammable liquids. Flammable liquids and their vapors are
explosive and can cause severe burns or death.
Kickback
To reduce the risk of injury from kickback, hold the spray wand securely with
both hands when the machine is on.
Electric Shock Do not use near electric power lines or receptacle outlets.
Chemical Burns
To reduce the risk of injury or damage, DO NOT USE ACIDS, ALKALINES,
BLEACHES, SOLVENTS, FLAMMABLE MATERIAL, OR INDUSTRIAL GRADE
SOLUTIONS in this product.
V Volts Voltage
n
o
No Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Loading ...
Loading ...
Loading ...