Loading ...
Loading ...
Loading ...
HOW TO USE THE ON BOARD TOOLS
Place the vacuum cleaner in the Upright posi-
tion.
1
Hold the connection tube of the suction
hose in one hand and the handle in the
other. Then pull out the connection tube
from the suction pipe. Then use the On
Board Tools (Fig. 32)
2 Then select the tool best suited for the
cleaning task from the descriptions below.
Connection tube
Extension wand Suction pipe
Fig. 32
Extension wand (Models: EC-12TWT4/
12TWT2/12TXT2/12SXT4B)
For reaching ceilings,curtains,etc.(Fig.36)
When connecting two wands, meet the illus-
trated mark each other .(Fig.33-1)
Telescopic wand (Models: EC-14TWT6/
14TAT6/12TWT6)
For reaching cellings,curtai:ns,etc.(Fig.36)
_Turn the wand to unlock; wand will turn
freely.
Extend the wand to its full length. Then
turn the wand to Iock.(Fig.33-2)
Crevice tool
For door tracks, narrow spots, etc.(Fig.34)
Combination Upholstery' tool and
Detachable brush.(Fig.35)
With detachable brush for cawed furniture,
table tops, books, lamps, baseboards, etc.
Without detachable brush for draperies, mat-
tresses, clothing, carpeted stairs, etc.
Fig. 33-1
O
Fig. 34
Fig. 36
Fig. 35
Detachable brush
Press the knob downward to remove the Detachable brush
from the Upholstery tool.
Insert the front portion of the Detachable Brush into time
groove located inside the front of the Upholstery tool.
Pull up on the knob to reattach the brush the Upholstery tool.
13
Loading ...
Loading ...
Loading ...