Loading ...
Loading ...
Loading ...
Care
Battery
Screw
Battery
contact
Cable
connector
Cable connector
latch
Cable connector cover
Battery Pack Removal and Replacement
The battery pack is removeable and replaceable.
At the end of the product's or battery's life the battery should be removed for
disposal and recycling. Only a technically competent person should undertake
battery removal and replacement. If uncertain as to how to replace your battery
pack, we suggest you take your unit to a reputable small appliance service
technician to have this service performed.
Follow these steps for battery removal
or replacement.
1. Switch off the product and ensure the charger is disconnected.
2. Remove the handle tubes and dust tray.
3. Turn the unit over, being careful not to switch the product on.
4. Using a #1 Phillips screwdriver unscrew the battery cover.
5. Carefully lift the battery out.
6. Slide the plastic cover off the black (-) cable connector.
7. Push the latch on the connector and pull the connector off the battery contact.
8. Repeat for the red (+) cable connector.
9. Push the cable connectors onto the new battery contacts, ensuring they are
securely fitted.
10. Slide the plastic covers back over the connectors.
11. Replace the battery into the compartment and refit the battery cover and
screw.
CAUTION : NEVER touch both the metal battery contacts at the same time
with any metal objects as this may create sparks that can cause small burns.
CAUTION : NEVER use the unit in a partially assembled state
Replacement batteries can be purchased from Grey Technology:
Tel:08707944001 www.greytechnology.co.uk
ONLY USE A REPLACEMENT BATTERY AS SUPPLIED BY MANUFACTURER
Loading ...
Loading ...