Loading ...
Loading ...
Loading ...
Emptying The Dust Container
To achieve the best performance, empty the Dust Container after each use.
To remove the Dust Container grip the clear window and the bottom of the
container and pull it out from the side of the unit.
To replace the Dust Container slide it back into the
Unit until it is securely
in place.
NOTE: be sure not to turn the sweeper on
While the dust container is removed.
Empty dust from the Dust Container.
The dust container can be cleaned with
a damp cloth.
Ensure the dust container is completely
dry before replacing in the sweeper.
Note: peg to locate in unit.
Brush Roll and Edge Wheel Removal
The Brush Roll and Edge Wheel can be removed for cleaning or replacement.
1. Push the latch and un-hook the Edge Wheel Cover from the front of the unit.
2. Slide the belt off the end of the Brush Roll drive gear.
3. Lift the end of the brush bar, then slide
out of the unit.
4. The Edge Wheel Brush can be pushed out of the Edge Wheel Cover.
5. R
6. To replace the Brush Roll fit the shaft into the bearing in the housing, then
engage the end with the drive gear into the unit.
Note the peg to
locate the Brush Roll into the unit.
7. Refit the belt onto the drive gear.
8. Hook the Edge Wheel Cover onto the unit and push into place until the latch is
securely engaged.
emove any hair, fibre, and dust from the Brush Roll and Edge Wheel.
Replacement Brush Bars and Edge
Wheels can be purchased:
Tel:08707944001 www.greytechnology.co.uk
Operation
Loading ...
Loading ...
Loading ...