Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
19
Wall spacers
The wall spacers on the back of
your refrigeration appliance are de-
signed to ensure that the declared en-
ergy consumption is achieved. They
also prevent the build-up of condens-
ation at high ambient temperatures.
Fitting wall spacers increases the
depth of the refrigeration appliance by
approx.20mm.
Risk of damage as a result of in-
correct handling.
The wall spacers must not be fitted
when the refrigeration appliance is
laid on its back.
Remove the wall spacers from the
back of the appliance.
The refrigeration appliance does not
require wall spacing at the side. All
drawers and shelves can still be pulled
out.
Installing the refrigeration ap-
pliance
Risk of injury and damage due to
the refrigeration appliance tipping
over.
There is an increased risk of injury
and damage if the refrigeration appli-
ance is installed by a single person.
Two people are required for installing
the refrigeration appliance.
Risk of damage to the appliance
door caused by impact.
The appliance door could hit the wall
of the room resulting in damage to
the door.
Protect the appliance door by fitting
a felt stopper, for example, to the
wall of the room.
Risk of damaging the floor.
Moving the refrigeration appliance
can cause damage to the floor.
Move the refrigeration appliance
carefully on floors that are sensitive
to scratching.
Tip: The refrigeration appliance must be
empty when it is installed.
Prepare the refrigeration appliance for
installation as close as possible to its
intended installation site.
Connect the refrigeration appliance to
the electricity supply as described in
“Electrical connection”.
Move the refrigeration appliance
carefully to its intended installation
site.
Loading ...
Loading ...
Loading ...