Loading ...
Loading ...
Loading ...
10
4. Optional: For improved dust ltration, t the dust collection bag ange onto the inlet port, taking
care not to damage the bag (Fig. 5).
5. Place the power head back on the collection tank, and secure it in place using the latches and
snap into place (Fig. 6).
OPERATING INSTRUCTIONS: DRY VACUUMING
6. Insert the larger end of the hose into the vacuum port of the collection tank and lock into place.
7. Choose the desired accessory and insert onto the end of the hose or extension wand (Fig. 7).
8. Verify that the switch is in the ‘O’ OFF position before plugging the power cord into the power
outlet. Plug the power cord into the outlet (Fig. 8 & 9).
9. Turn the motor on by ipping the switch to the ‘I’ ON position and begin vacuuming (Fig. 10).
10.Once you have completed vacuuming, ip the switch to the “O” OFF position and unplug the
power cord from the outlet.
O = OFF I = ON
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
DO NOT USE THE DUST BAG FOR LIQUID VACUUMING.
FILTER CLEANING OPERATION
IMPORANT: Only perform the lter cleaning operation when the cartridge lter is installed.
This vacuum is equipped with integrated lter cleaning to increase dust collection efciency. To use
the integrated lter cleaning feature, follow the instructions below.
1. Position the end of the hose nozzle on the at surface on power head. Make sure the end of the
hose nozzle is sealed properly.
2. Flip the on/off switch to the “I” ON position.
3. Press the lter cleaning button and hold it down for 3-4 seconds (Fig. 11).
4. Repeat the step 3 two more times.
Loading ...
Loading ...
Loading ...