Loading ...
Loading ...
Loading ...
If the toilet is in a location you will not visit for a long time, drain the water.
(The water in the tank may cause malfunctions or become contaminated and cause skin irritation or other problems.)
How to drain the water
1
Drain the water from the toilet tank.
(Page 63 Step
1
,
2
)
2
Press
"Wand CLEAN" button.
• Open the wand cover.
(Release the pressure from the water supply
pipe.)
3
Unplug the power plug.
4
Drain the pipe.
(Page 63 Step
5
)
5
Pull out the water drain lever.
dnaw eht dnuora morf tuo semoc retaW•
(about 20 seconds)
Water drain lever
6
Release your hand to return the
water drain lever to its original
position.
■
If water may get frozen
• Add antifreeze solution in the water in the bowl to
prevent freezing.
(The antifreeze solution should not be
ushed out.
Collect it before using the toilet and dispose of it.)
■
To use the product again
)woleb eeS( .deilppuser eb ot sdeen retaw ehT•
Resupplying the Water
1
Open the shutoff valve. (Page 19)
.tinu niam eht ro epip a morf gnikael ton si retaw taht kcehC•
2
If the power is not on,
insert the power plug.
.pu sthgil DEL "rewoP" ehT•
3
Discharge water from the wand.
(1) Pressing down the left side of the toilet seat,
(2)
Press "Rear cleansing" button on the remote control to
discharge water from the wand.
.elcatpecer rehto ro puc repap a ni retaw eht hctaC•
(3)
Press "Stopping" button.
■
If the remaining water has frozen and no water comes out
htolc a gnisu evlav ffotuhs dna esoh ylppus retaw eht mraw dna ,moorhtab eht fo edisni eht taeH•
soaked in warm water.
Soft cloth soaked in water
(to prevent scratching)
Paper cup
What to Do?
Long Periods of Disuse
64
Removal of Operation Guide
How to remove the operation guide
Follow the procedure below.
1
Unplug the power plug.
2
Remove the remote control from the hanger.
(Page 18)
3
Remove the hanger and
operation guide.
Hanger Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Insert the power plug.
•
The "Power" LED lights up.
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
65
Reference
Loading ...
Loading ...
Loading ...