Philips TAB7908/10 Soundbar 5.1.2 with wireless subwoofer

User manual - Page 17

For TAB7908/10. Series: 7000 Series

PDF File Manual, 24 pages, Read Online | Download pdf file

TAB7908/10 photo
Loading ...
Loading ...
Loading ...
17EN
Auto volume (
AUVOL
)
Combine Auto volume with Night mode.
OFF: Do not use “Auto volume” .
ON: Responds in real time to
dierent sources and types of
content to maintain consistent
loudness.
NIGHT: Maintain even loudness
for all sources and types of
content, and enhanced vocal and
dialogue to make it easier to hear
in a quite listing environment.
DTS Virtual:X (
DT VRT X
)
DTS Virtual:X allows you to enjoy multi-
dimensional sound regardless of room
size, layout, or speaker conguration.
DTS Virtual:X technology features
DTS’s proprietary virtual height and
virtual surround processing to deliver
an immersive sound experience from
any type of input source (stereo to 5.1.2
channel) and speaker conguration.
ON: This mode uses DTS Virtual:X
with virtual height and virtual
surround processing to realize a
three-dimensional sound eld when
the height speakers are not used.
OFF: Do not use “DTS Virtual:X” .
» Only available if DTS content is
detected.
AV SYNC (
AV XXX
)
Set the Audio Delay.
Video image processing, sometimes
longer than the time required to process
the audio signal. This is called delayed.
Audio Delay feature is designed to
remedy this delay.
AV 00. AV 10 ... AV200
» By default, the audio delay is set
to 00.
Center (
CTR XX
)
Adjust the center channel volume.
CTR-5 ... CTR+5
» By default, the center channel
volume is set to 0.
Display o (
DI P
)
The display to be turned o after idling
(no user action) for 3 seconds, and shall
be remembered and recalled at the next
power up.
OFF: Display o after idling (no
user action) for 3 seconds.
ON: Display won’t turn o.
» By default, the display is set to ON.
Auto Standby (
APD
)
The soundbar automatically turns to
Standby mode after about 15 minutes
if the TV or the external soundbar is
disconnected (or USB, BT function bit
playback pause), or switched off.
ON: Auto-Standby ON.
OFF: Auto-Standby OFF.
» By default, Auto-Standby is set
to ON.
DIM (
DI XX
)
Set display brightness.
HIGH, MID, LOW
» By default, the dimmer is set to
MID.
Audio reset (
AUR T
)
Restore the default sound eect
Item Default settings
EQ Movie
Master Volume 10
Subwoofer Volume
0
Loading ...
Loading ...
Loading ...