Loading ...
Loading ...
Loading ...
Warning and Safety instructions
13
Risk of burning or scalding due to hot temperatures. The metal
cap located on the inside of the door glass will be hot after drying.
Open the door wide after drying. Do not touch the metal cap.
Fabric softener and similar products must be used according to
the instructions on the manufacturer's packaging.
If the correct amount of detergent is dispensed, the washer-dryer
should not need to be descaled. If, however, you do wish to descale
your washer-dryer, only use special non-corrosive descaling agents.
These are available from Miele. Strictly observe the instructions on
the packaging.
Be careful when opening the door following use of the steam
function. There is a danger of burning due to escaping steam and
the high temperature of the surface of the drum as well as the
porthole glass. Stand back away from the machine and wait until the
steam has dissipated.
To prevent the risk of fire, the following textiles must not be dried
in this washer-dryer:
- Items which have not been washed.
- Items, such as workwear, which have not been thoroughly
cleaned and are still soiled with grease, oil or other deposits (such
as cooking oils, cosmetics, lotions etc). If items have not been
thoroughly cleaned, there is a danger that they might ignite when
heated, even after they have been removed from the dryer at the
end of the programme.
- Items that have been soiled with flammable substances such as
cooking oil, acetone, petrol, kerosene, spot removers, turpentine,
waxes, wax removers and other chemicals (e.g. mops and floor
cloths).
- Items which have been splashed with hair lacquer, hair spray, nail
varnish remover or similar substances.
When washing such heavily soiled items ensure that you use
sufficient detergent and select a high temperature. If in doubt,
wash the items several times.
Loading ...
Loading ...
Loading ...