OFF/ON
OFF/ON
OFF/ON
OK
MIN
MAX
1L
MAX
2L
OFF
+
OFF
+
OFF/ON
OFF/ON
10
Sec
OFF/ON
OFF/ON
OFF/ON
OK
OFF/ON
OFF/ON
OFF/ON
OK
OFF/ON
OFF/ON
OFF/ON
OK
20
Sec
Let hot water spout
out for 10 seconds.
Return knob to the
"o" position.
Turn o the coee
button.
Position cup on Drip
Tray, under Filter
Holder.
Make sure the
steam button is
OFF.
Turn on the coee
button.
Let hot water spout
out for 20 seconds.
Turn o the coee
button.
Empty hot water from
cup.
For the optimal temperature of the coee, preheat the brewing system with your coee cup at
least once before extraction.
OFF/ON
OFF/ON
TURN
CENTER
Turn on. The machine
will start to preheat.
OK LIGHT is fully
illuminated = Ready.
Insert the Filter without
any coee grounds into
the Filter Holder.
Keep Filter Holder
flat, insert into Group
Head.
Filter Holder should
be in the center
position.
Turn it to right.
Fill the reservoir with
room temprature
water.
Plug in. Turn on. Place cup on counter
top and position
Steam Wand.
Turn on the coee
button.
Turn the Steam Knob
to position.
Pre-heat the brewing systemFirst use cycle
Now your espresso machine is ready to use.
21
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OK
NOTE：
There will be a loud noise and
little shake when the machine running first
time. It’s normal for a 20 bar pump. The
noise will be weak in the future using.
Rinse and get your machine ready to operate. This is only required the first time out of the box.
Loading ...
Loading ...
Loading ...
