Loading ...
Loading ...
Loading ...
UNDERMOUNT INSTALLATION
Please carefully read complete instructions before beginning
installation.
Note: These instructions are for installation with solid surface,
composite material countertops. Ancona recommends
professional countertop installers, customer is responsible
for damage to the countertop or sink during installation.
1. Unpack the new sink and check the contents of the materials
supplied: sink, mounting brackets, and cut-out template
(depending on model).
2. Position cut-out sink template as desired and trace it on the
countertop.
3. Locate and drill the clearance hole inside the cut-out line.
4. Cut the countertop opening by carefully following the line traced
from the template according to the countertop manufacturer’s
instructions.
5. Drill faucet holes and install faucet according to manufacturer’s
installation instruction.
6. Locate and drill the mounting holes (following the countertop
manufacturer’s instructions) as shown below.
Holes should allow even spacing of mounting bracket around the
sink.
7. Fasten mounting clip to countertop loosely.
Fastener
Screws
Countertop
Loading ...
Loading ...
Loading ...