Smeg SO6401S2B SteamOne Galileo Oven

USER MANUAL - Page 33

For SO6401S2B.

PDF File Manual, 41 pages, Read Online | Download pdf file

SO6401S2B photo
Loading ...
Loading ...
Loading ...
80 - CLEANING AND MAINTENANCE 914779946/C
3. Descaling starts. The heating elements are
activated for the first 10 minutes of the
process.
4. After 10 minutes, the heating elements
switch off (the indicator lights and
switch off) while the descaling process
continues for the next 50 minutes.
After completion of the descaling process, the
appliance sounds an acoustic signal and the
display shows the request to drain the descaling
solution.
Reservoir draining
1. Open the door
2. Place the deep pan on the third shelf from
the bottom. Push it against the rear wall of
the oven cavity. Press the temperature knob
.
The descaling solution starts to flow into the
deep pan from the drain pipe on the right side
of the rear wall of the oven cavity.
3. Wait for the end of the exhaust flow (check
that both level indicator lights are
switched off).
4. Press the temperature knob to stop the drain
function.
5. Drain the descaling solution from the deep
pan.
Rinse
Once the descaling agent has been drained,
the hydraulic circuit must be rinsed with clean
water.
The display will show the request to fill the
reservoir with water.
1. Open the door.
2. Place the deep pan on the third shelf from
the bottom. Push the tray up against the rear
wall of the oven cavity.
3. Pull the loading drawer out of its housing.
4. Insert the funnel provided in the loading
drawer.
5. Pour one litre of water using a bottle or a
measuring jug.
6. Press the temperature knob to start the
function and wait one minute.
At the end, the appliance sounds an acoustic
signal and the display shows the request to
Each time the door is opened, the
function in progress stops and then
automatically restarts when the door is
closed again.
Take care: the descaling solution may
be still hot.
Use cold tap water which is not too
hard, softened water or still mineral
water.
Do not use distilled water, tap water
with a high chloride content (> 40 mg/
l), or other liquids.
The overflowing of water inside the
oven cavity is not intended as a
malfunction, rather it is part of the rinsing
procedure.
Loading ...
Loading ...
Loading ...