Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 79914779946/C
e
of the rear wall of the oven cavity.
6. Wait for the end of the exhaust flow (check
that both level indicator lights are
switched off).
7. Press the temperature knob to stop the drain
function.
The display shows the request to fill the reservoir.
8. Drain the water (detergent) from the deep
tray.
Reservoir filling
1. Mix 100 g of citric acid with 650 ml of
water in a jug.
2. Open the door and pull the loading drawer
out of its housing.
3. Insert the funnel provided in the loading
drawer.
4. Pour the descaling solution into the funnel.
5. At the end, remove the funnel and place the
loading drawer back in its place.
Descaling
1. Close the door
2. Press the temperature knob to start the
function.
From now on, it will no longer be
possible to cancel the descaling
process.
Do not use lactic acid or other
descaling agents.
If there is too much water in the
reservoir, the excess water will drain
into the oven cavity. In this case dry with
a cloth or sponge before proceeding.
Loading ...
Loading ...
Loading ...