Loading ...
Loading ...
Loading ...
7.4 INSTALL THE SHOE
1. Turn the shoe release lever counterclockwise.
2. Push the shoe into the machine.
3. Turn the shoe release lever to original position.
NOTE
Make sure that the shoe is tightened.
7.5 REMOVE THE SHOE
1. Turn the shoe release lever counterclockwise.
2. Pull the shoe from the machine.
3. Turn the shoe release lever to original position.
7.6 INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
7.7 REMOVE THE BATTERY PACK
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
8 OPERATION
WARNING
Always wear eye protection.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
8.1 START THE MACHINE
1. Push the lock-out button to the left side to unlock the
switch trigger.
2. Pull the switch trigger.
WARNING
Before you use the machine, wait until the blade gets
to fully speed.
8.2 STOP THE MACHINE
1. Release the switch trigger.
8.3 OPERATE THE MACHINE
1. Clamp the work piece.
8
English
EN
Loading ...
Loading ...
Loading ...