Loading ...
Loading ...
Loading ...
Setting Record Linkage
On the Alarm page, click
to enable record linkage, select the channel as needed, and set
Post-Record to set alarm linkage and record delay.
After Post-Record is congured, alarm recording continues for an extended period after the alarm
ends.
Figure 6-55 Record linkage
6.5.1.2.3 Snapshot Linkage
After snapshot linkage is congured, the system can automatically alarm and take snapshots when
an alarm is triggered.
Prerequisites
After the corresponding alarm type (Normal , Motion, or Alarm) is enabled, the snapshot channel
links capturing picture. For details, see "10.3 Setting Record Plan".
Procedure
On the Alarm page, click
to enable snapshot linkage, and select the channel as needed.
Figure 6-56 Snapshot linkage
6.5.1.2.4 Alarm-out Linkage
When an alarm is triggered, the system can automatically link with alarm-out device.
On the Alarm page, click
to enable alarm-out linkage, select the channel as needed, and then
congure Post alarm.
When alarm delay is congured, alarm continues for an extended period after the alarm ends.
Operation Manual
66
Loading ...
Loading ...
Loading ...