Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Removable Parts
CLEANING MATERIALS
• Dishwashing detergent
• Warm water
e Soft cloth
Spring Clip Insert
Flat on
Control
Shaft
TO REMOVE
1. Be sure the control knob is in the
off position.
2. Pull straight off the stem.
Using a piece of string can make
removing the knob easier. Slip the
string under and around the knob,
pulling straight out.
METHOD OF CLEANING
Wash the knob thoroughly with soapy
water. Dry completely with a soft
cloth. DO NOT let the knob soak.
TO REPLACE
1. Check the back of the knob.
The molded flat area of the knob
is designed to fit perfectly onto
the knob stem.
2. Align the flat side of the knob to
the flat area of the knob stem.
3. Push the knob back as far as it
will go.
_ AUT|ON: You must
disconnect electrical
power to the oven at the
main circuit breaker or fuse box
before attempting to replace oven
light bulbs. Do not touch the light
bulb with bare hands. The bulb
gets very hot very quickly. Wrap
foam rubber from bulb package
around bulb when installing.
When removing the bulb, wait
until the bulb has cooled and
To give you the best lighting available,
your oven has two halogen bulbs.
One is in the left corner of the rear
wall, the other is on the ceiling of the
oven cavity.
39
Receptacle Socket
Bulbwith _)_
Wrapping. ( ..
tlt_ _[_UID
Glass Cover
TO REMOVE
1, You must disconnect electrical
power to the oven at the main
circuit breaker or fuse box.
2. Turn the glass cover
counter-clockwise 1/4turn until
the tabs of the glass cover clear
the grooves of the socket.
3. Pull straight out to remove the bulb.
TO REPLACE
1, Wrap bulb with cotton cloth or
bulb packaging material. Don't
touch bulb with your fingers.
2. Push bulb straight into receptacle
all the way. Use only a 120-volt,
35-watt Halogen bulb.
continued on next page
Loading ...
Loading ...
Loading ...