Loading ...
Loading ...
Loading ...
70
TVO TRG 1072
STEP 4.C - ROTARION CAM Kit application example:
Large Sensor Chrominance & Luminance (25% faster than traditional RGB+L)
with SCT Corrector II -0.63x and M48 Camera rotating adapters [3.5]
Equipment Setup: SC telescope + Rotarion CAM + 2x Starizona Corrector II -0.63x + Camera Moravian G3 Mark II
Mono & Moravian G3 Mark II Color
*Note: Using in the imaging assembly M48 Rotating camera adapters [3.5], and other M48 parts (normally with inner diameter 44mm) may cause
very small vigneting in full-frame sensors, to be corrected by taking “flats”.
**Note: Example configuration drawing only. Additional spacers/extenders may be necessary between Corrector and camera and between SCT
and Rotarion. Consult the telescope operating guide for details.
***Note: the locking screws of the M48 Rotating camera adapters [3.5] have to be aligned as seen below; to do so, you must remove all 3 locking
screws before screwing the M48 Camera Adapter body parts, use optionally the 0,5mm rings [3.4] to achieve locking-screws alignment.
Moravian G3
Mark II Color
3.2
3.3
3.4
3.5
3.7
4.1
3.6
*** Locking-screws must be aligned in
M48 Rotating Camera Adapters [3.5],
remove locking-screws before screwing
M48 body part, use optionally 0,5mm
rings [3.4] for alignment.
Group #2
SC Thread
Starizona SCT
Corrector II
-0.63x
Moravian G3
Mark II Mono
Loading ...
Loading ...
Loading ...