Loading ...
Loading ...
Loading ...
8
Canopy
Round
Hole
Mounting Bracket Screw
J-shaped Slot
Blade Screw
Blade Washer
Motor Screw
Slot
Motor Screw
Blade Arm
Screw Cap
Blade
ASSEMBLY INSTRUCTIONS
12
11
9. Raise the canopy, ensure the two mounting bracket
screws are aligned with the J-shaped slots in the canopy.
Then turn the canopy in a clockwise direction until the
mounting bracket screws are completely engaged in
the J-shaped slots. Install the two previously removed
mounting bracket screws in the round holes. Securely
tighten all mounting bracket screws.
10
9
11. Attach the blade to the blade arm using blade screw,
blade washer and screw cap from the hardware kit.
Repeat for each blade.
Note: Blade arms have a label that indicates which
side faces the motor. The blade attaches to the
opposite side of the blade arm.
10. Remove the six motor screws and washers from the
bottom of the motor using a magnetic Phillips-head
screwdriver.
Note: The slot in the underside of the light kit allows
screwdriver access to motor screws.
12. Align the holes in the blade arm with the holes
in the underside of the motor. Then, use a magnetic
screwdriver to lift the motor screws through the holes in
the blade arm and into the motor. Attach the blade arm
assembly to the underside of the motor with a magnetic
Phillips screwdriver. Completely secure each blade arm
to motor before moving to the next.
Note: The slot in the underside of the light kit allows
screwdriver access to motor screws.
Loading ...
Loading ...
Loading ...