Loading ...
Loading ...
Loading ...
Downrod
Clip
Set Screw
Yoke
Downrod
Pin
Downrod
6
ASSEMBLY INSTRUCTIONS
1
1. Turn OFF the electrical power at the main fuse or cir-
cuit breaker.
DANGER: Failure to disconnect the power supply prior
to installation may result in serious injury or death.
4
3
4. DOWNROD MOUNT - Remove the downrod clip and
downrod pin from the downrod. Then, loosen but donβt
remove the two set screws at the top of the yoke.
2. Loosen all four mounting bracket screws located on
the mounting bracket and completely remove the two
screws from the round holes in the canopy. Save the
screws for later. Remove the canopy from the mounting
bracket.
3. Install the mounting bracket to the outlet box (sold
separately) using the screws and washers provided with
the outlet box.
WARNING: To reduce the risk of ξre, electric shock,
or personal injury, mount to the outlet box marked
βacceptable for fan supportβ and use the mounting
screws and washers provided with the outlet box.
Mounting Bracket Screw
Mounting Bracket
Outlet Box
2
Loading ...
Loading ...
Loading ...