Loading ...
Loading ...
Loading ...
Faults and what to do about them en
25
1. Switch off the appliance. Pull out the
mains plug.
2. Drain the water.
3. Pull down emergency release with
a tool and release.
Door can then be opened.
Information on the display panel
Faults and what to do about
them
Display Cause/Remedy
è flashes Please close the door immediately because of rising water level; in pause sta-
tus, è flashes fast and sound an alarm. Please close the door; Door cannot be
locked/unlocked due to high temperature of the door lock coil. Wait a moment
and try again. Or switch off the machine, then switch on the machine again in 5
seconds. The machine can be locked/unlocked.
| Open the tap.
Inlet filter blocked. Clean filter~ Page 24
Supply hose kinked or blocked.
E:32 Alternating display with End when programme is finished, indicating the laun-
dry inside are unbalanced. The washing machines’ unbalanced load detection
system can not adjust the imbalance.To protect the mechanical systems, the
machine will not achieve the highest spin speed, and the laundry can not be
spinned completely. Please wash small and large items of laundry together.
E:18 Clean detergent solution pump ~ Page 23
outlet pipe/drainage hose blocked, clean it. ~ Page 24
Other displays Switch off the appliance, wait 5 seconds and switch it back on.
If the display appears again, call the after-sales services.
Faults Cause/Remedy
Water is running out. ■ Fit/refit drainage hose correctly.
■ Tighten screw–fitting on the supply hose.
Water not flowing in.
Detergent not washed in.
■ 䄒㯝倍橵 (Start/Pause) not selected?
■ Tap not open?
■ Filter blocked? Clean filter.
■ Supply hose kinked or jammed?
There is water in the drum?
Loading ...
Loading ...
Loading ...