Loading ...
Loading ...
Loading ...
15ninjakitchen.com
14 ninjakitchen.com
2 Align and lower the bowl onto the motor
base. Handle should be aligned slightly
to the right of the LOCK symbol on the
motor base.
15ninjakitchen.com
IMPORTANT: As a safety feature, the
power button ( ) will flash and the
motor will not work if the bowl and lid
are not installed correctly. When the
bowl and lid are installed properly, the
power button ( ) will be solid, indicating
that the appliance is ready for use.
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
NOTE: Please follow the same instructions
to install the Dough Blade Assembly.
USING THE FOOD PROCESSOR BOWL
1 Place the motor base on a clean, dry, level
surface such as a counter or table top.
3 Rotate the bowl clockwise to lock into
place. You will hear a click when the lock
is engaged.
4 The bowl can be placed on the motor
base two ways; the handle can be on the
front right corner or the front left corner.
NOTE: The 64 oz. bowl is not intended
for blending drinks. DO NOT overfill.
NOTE: To add liquids during processing,
open the drizzle hole on the top of the lid
and pour the liquid slowly into the mixture.
NOTE: The Chopping and Dough
Blade Assemblies will fit loosely on
the drive gear.
5 Holding the desired Blade Assembly by
the top of the shaft, place it onto the
drive gear inside the bowl. Ensure that
the Blade Assembly is seated properly
and is standing upright.
6 Add the ingredients to the bowl, making
sure that they do not exceed the highest
measured marking line on the side of
the bowl.
7 Holding the lid by the handle in the
upright position, place it on top of the
bowl aligning the arrow ( ) located on
the lid with the arrow ( ) located on the
bowl’s handle. Press the handle down
until you hear a click.
8 Plug the power cord into the electrical
outlet and press the power button ( ).
Select the speed that best suits your
needs. Pulse ingredients for even chopping
by pressing down in short intervals.
7 When you have reached your desired
consistency, stop the appliance by
pressing the power button ( ) and wait
for the Chopping Blade Assembly to
stop turning.
NOTE: Please refer to Speed Settings
& Uses chart for suggested uses and
speeds.
8 To remove the lid, press the release
button on the lid and pull the lid handle
up to a 90° angle.
9 Turn the bowl counter-clockwise and lift
it to remove it from the motor base.
10 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
Loading ...
Loading ...
Loading ...