Loading ...
Loading ...
Loading ...
7
3. Check existing outlet box (not included) to ensure it is
securely fastened to at least two points in a structural
ceiling member and can support the full weight of the
fan. Once verified, install mounting bracket (A) to the
outlet box using the screws and washers provided with
the outlet box.
INITIAL INSTALLATION INSTRUCTIONS
4. Remove the motor screws and motor blocks from each
motor of motor body. Discard motor blocks and save
the motor screws for later use.
Hardware Used
x 6
CC
Motor Screw
3
Open End
A
A
G
W
V
Note: If using the angel mount, make sure open end of
mounting bracket (A) is installed facing the higher point
of the ceiling.
DANGER: A loose outlet box can cause the fan to
wobble and increase the fan's potential to fall, which
could result in serious injury or death.
4
Motor Block
CC
Metal Bracket
5. Attach metal bracket to motor assembly (G) on both
ends and securely tighten with four bars (V) and spring
washers (W) provided.
5
Loading ...
Loading ...
Loading ...