Loading ...
Loading ...
Loading ...
15
FINAL INSTALLATION INSTRUCTIONS
14.
Attach the 9-pin connector preassembled on bottom
housing (R) to the 9-pin connector from switch housing
assembly (F). Then, re-attach the bottom housing (R)
to the switch housing assembly (F) with previously
removed screw (Step 11, page 14).
F
R
14
Screw
Remove the preassembled wiring harness (with pull
chain, 6-pin connector and plugs) from the light kit (L).
12.
Remove the bell mouth nut from pull chain and pass
the pull chain leg throuth the round hole on the bottom
housing (R). Tighten it with bell mouth nut. Attach the
6-pin connector from the wiring harness to the 6-pin
connector preassembled on bottom housing (R).
13.
L
12
Wiring Harness
R
13
Wiring
Harness
Bell Mouth
Nut
Loading ...
Loading ...
Loading ...