Loading ...
Loading ...
Loading ...
OPERATION ]
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off air" (antenna)
and cable channets. After the available channels are memorized, use the CH • and
CN • buttons to scan through the channels. This eliminates the need to change chan
nets by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet
ing channels (manual).
Selecting the Video Signal-source
Before your television can begin i;qemorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna of a cable system).
1
Pressthe MENU button to
oIsptay me menu
Press the CU V button m
select" Channel' men
Dress the VOI.+button
2
Repeatedly press the
VOI.+ button to cycle _,_/eaw _ s_
through these choices:
ANT (antenna) STD,HRC
or IRC(all cable TV).
Note: STD, HRC and IRC identify/various types of cable
TV systems. Contact your local cable company to identify/
the type of cable system that exists in your particular area.
At this point the signal source has been setected. Proceed
to "Storing Channels in Memory" (next page).
35 (}l,\p l_ rim]]: 1_,o,,}},,,,i,,N
Loading ...
Loading ...
Loading ...