Loading ...
Loading ...
Loading ...
11
Operations
Operating Instructions
STEP 1: Check engine oil level. Oil level should be
level to the fill markings on the dipstick. Be sure the
machine is level when checking the oil level. (Refer to
the engine's operating manual included with machine.)
We recommend that the oil be changed after the first 5
hours of use, then once every 100 hours. Note:
Improper oil levels will cause low oil sensor to shut off
engine.
CAUTION: Do not run engine with high or low oil
levels as this will cause engine damage.
ATTENTION : Ne pas faire fonctionner le moteur si
le niveau d'huile est trop haut ou trop bas, car cela
risquerait d'endommager le moteur.
STEP 3: Connect garden hose to the cold water source
and turn water on completely. Never use hot water.
STEP 2: Fill gas tank with unleaded gasoline. Do not
use leaded gasoline.
STEP 4: Before installing pressure nozzle, trigger
spray gun to eliminate trapped pressure. Then run
machine, allowing water to flush through the system
until clear. Engage the safety latch before inserting
high pressure nozzle.
98011030-9
Oil
Dipstick
98011930-7
Cold
Water
Source
Garden
Hose
98011930-10
Gas
Tank
98011930-11
Safety Latch
Kärcher SSG Operator’s Manual 9.801-193.0 - BF
Loading ...
Loading ...
Loading ...