Loading ...
Loading ...
Loading ...
Operation Guide 3367
7
❚
Elapsed Time Measurement
Start Stop Reset
Pressing the A button while timing is stopped resets the stopwatch to all zeros.
Cumulative Time Measurement
Pressing the D button to restart the stopwatch without resetting it to all zeros causes the elapsed time measurement to resume from
where it was last stopped.
❚
Split Time Measurement
Start Record Split Clear Split Stop Reset
Pressing the A button while timing is being performed displays the split time screen, but timing continues internally.
• Changing to another mode while a split time is displayed clears the split time operation.
❚
1st and 2nd Place Finishers
Start 1st Finish
(Displays time of 1st finisher.)
2nd finish Displays time of 2nd finisher. Reset
Pressing the D button while the split time screen is on the display stops elapsed time measurement, and leaves the split time screen on
the display. Press the A button to exit the split time screen and display the elapsed time when the measurement was stopped.
Split Time Screen
The split time screen cycles alternately cycle through the split
indicator, a minute/second screen, and a 1/100 second screen.
Split Indicator Minutes Seconds 1/100 Second
Home time settings include your Home City (the city where you will
normally use the watch), the current time and date in your Home
City, and other settings.
• Use the Timekeeping Mode to configure home time settings.
• Also use the following procedure when you want to turn Power
Saving on or off.
If you are planning to manually adjust both the digital and
analog settings, be sure to adjust the digital setting first.
❚
To configure home time settings
1. In the Timekeeping Mode,
hold down the
AA
AA
A button
for about two seconds.
• This will cause the city code
currently selected as the
Home City to flash on the
display.
2. Press the
DD
DD
D button to
scroll westward through
the city codes until the
one you want to select is
displayed.
• See the “World Time City
Code List” for information
about city codes.
• Holding down either button
scrolls at high speed.
3. When the city code you
want is displayed, press
the
CC
CC
C button.
• This will display the summer
time (DST) setting screen.
City Code
TYO = Tokyo
(Scrolls
Westward)
6. While the 12/24-hour
timekeeping setting is
flashing, press the
DD
DD
D
button to toggle between
12-hour (“12H”) and
24-hour (“24H”)
timekeeping.
7. While the seconds are
selected, press the
DD
DD
D
button to reset them to 00
in accordance with the
time signal on the radio,
TV, etc.
• Pressing the D button while
the seconds count is in the
range of 30 to 59 resets it to
00 and also adds 1 to the
minutes. Pressing the D
button in the range of 00 to 29
resets the seconds count
without changing the minutes.
• Pressing the B button while
the seconds count is flashing
changes the face illumination
duration. See “To specify the
illumination duration” for more
information.
8. While the hour, minutes,
year, month, or day setting
is flashing, use the
DD
DD
D (+)
button to change the
setting.
• Holding down the D button
changes the setting at high
speed.
• When setting the hour, make
sure you specify AM (no
indicator) or PM (P) correctly,
or that you specify the correct
24-hour time.
• You can set a year in the range of 2000 to 2099. The day of
the week is set automatically in accordance with the date you
set.
• The watch automatically makes adjustments for leap years
and month lengths.
9. While the Power Saving
setting is flashing, press
the
DD
DD
D button to toggle it
on (ON) or off (OF).
• If you turn on Power Saving,
the Power Saving indicator
will be on the display when
you exit the setting screen.
Use the
CC
CC
C button to select each of the settings and the
DD
DD
D button to change them.
Indicates 12-hour or
24-hour timekeepin
g
.
Seconds reset to 00.
4. Press the
DD
DD
D button to
cycle the display through
the available summer time
(DST) settings until the
one you want to select is
displayed.
• AUTO
This setting enables the auto summer time setting, which
turns summer time on or off in accordance with the received
time calibration signal.
• This setting uses Japan summer time data when TYO is
selected as the Home City, and U.S. summer time data
when NYC, CHI, DEN, or LAX is selected as the Home City.
• Note that “AUTO” can be selected only when TYO, LAX,
DEN, CHI, or NYC is selected as the Home City.
• OFF
This setting turns off summer time and returns to normal
timekeeping.
• ON
This setting turns on summer time and advances the current
time by one hour.
5. When the summer time
setting is the way you
want, use the
CC
CC
C button to
cycle the display through
the settings shown below.
Summer Time
Home City
Code
Power Saving
12/24-hour
Timekeeping
Hour
Minute
Month Year
Day
Seconds
(Scrolls
Forward)
Hour
Minutes
Configuring Home Time Settings
Loading ...