Loading ...
Loading ...
Loading ...
Operation Guide 3367
6
3. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to change the
hour setting.
• Holding down either button
changes the setting at high
speed.
• When setting the hour, make
sure you specify AM (no
indicator) or PM (P) correctly
when using 12-hour
timekeeping, or that you
specify the correct 24-hour
time.
• The same 12-hour/24-hour
format you select for the
Timekeeping Mode home time
is also applied in the Alarm
Mode.
4. Press the
CC
CC
C button to
select the minute setting.
• This causes the minute digits
to flash.
5. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to change the
minute setting.
• Each press of the B (+) or
D (–) button changes the
minute setting in 1-minute
increments.
• Holding down either button
changes the setting at high
speed.
6. When the setting is the way you want, press the
AA
AA
A
button.
• This exits the setting screen.
• The display also will exit the setting screen automatically if
you do not perform any operation for about two or three
minutes.
(Increase)
(Decrease)
Minutes
(Increase)
(Decrease)
You can set the daily alarm in 1-minute increments. The watch
beeps for 10 seconds when the current time in the Timekeeping
Mode reaches the alarm time you set.
The Hourly Time signal causes the watch to beep every hour on
the hour.
❚
To display the alarm screen
In the Alarm Mode, press the
DD
DD
D button to toggle the display
between the alarm screen and the Hourly Time Signal
screen.
Alarm Screen
• Alarm off
Hourly Time Signal Screen
• Hourly Time Signal off
❚
To set the alarm time
1. In the Alarm Mode, press
the
DD
DD
D button to display
the alarm screen.
• When you enter the Alarm
Mode, the screen that was
displayed when you last
exited the mode appears first.
2. Hold down the
AA
AA
A button
for about two seconds
until the hour digits of the
alarm time start to flash.
• Displaying the alarm setting
screen automatically turns on
the alarm, which is indicated
by the alarm indicator.
Hour
Alarm Indicator
Using the Alarm and Hourly Time Signal
❚
To turn the alarm on or off
1. In the Alarm Mode, use the
DD
DD
D button to display the alarm
screen.
2. Press the
AA
AA
A button to toggle the alarm on (“ ”
displayed) or off (“ ” displayed).
Alarm Off
Alarm Time
Alarm Indicator
Alarm On
❚
To stop the alarm beeper
Press any button.
❚
To test the alarm
In the Alarm Mode, hold down the D button to sound the alarm.
❚
To turn the hourly time signal on or off
1. In the Alarm Mode, use the
DD
DD
D button to display the
Hourly Time Signal screen.
2. Press the
AA
AA
A button to toggle the Hourly Time Signal on
(“ ”) or off (“ ”).
Hourly Time Signal Off Hourly Time Signal On
Hourly Time Si
g
nal Indicator
❚
To perform elapsed time measurement
In the Stopwatch Mode, press the
DD
DD
D button to start and
stop elapsed time measurement.
(Split/Reset)
(Start/Stop)
❚
Stopwatch Mode Display Screens
• Elapsed Time Screen
The display shows the minutes and seconds.
Minutes
Seconds
• Paused Elapsed Time Measurement Screen
When elapsed time measurement is paused, the display alternates
between a minute/second screen and a 1/100 second screen at
2-second intervals.
2-second
Intervals
Minutes
Seconds
1/100 Second
Stopwatch Mode
The stopwatch measures elapsed time in units of 1/100 second up to 59 minutes, 59.99 seconds (60 minutes total). When the maximum
limit is reached, the elapsed time automatically returns to zero and timing continues from there.
Loading ...
Loading ...