Loading ...
Loading ...
Loading ...
4.1 Auto Off
This controller is fitted with a 3 hour Count Down Auto Off Timer which starts to
countdown from when your heat setting has been selected, and will switch power
off to the elements after approximately 3 hours. (+/- 15 Minutes)
Note: Once a heat setting has been selected and the controller is powered ON, the
countdown timer will not be affected by adjusting heat level.
The timer will only be reset to 3 hours by sliding the control knob to heat level
“O” or after being powered OFF and then back On.
When the controller has timed out, the element will turn off and the Red LED’s
on the front display will flash.
Slide the control knob to the “O” position to reset.
TURN OFF AND UNPLUG THE HEATED THROW WHEN NOT IN USE.
4.2 Pre Heat
The controller has a pre-heat facility in order to warm the Heated Throw Quickly.
Once you are warm enough, please turn the controller down to setting 2 or 1.
Please DO NOT leave the Heated Throw set on the Preheat setting (No. 3) once
you are warm enough as you may get too hot.
NOTE: The Heated Throw may not feel warm to touch unless it is wrapped
around your body. Areas of the Throw not in contact will stay cool.
Page 7 of 15
Rev 1
Loading ...
Loading ...
Loading ...