Loading ...
Loading ...
Loading ...
12
CONNECTING THE MAIN HANDLE AND SHAFT
1. Align the shaft with the main handle. Make sure that the protrusion on the shaft aligns with the
notch inside the handle as shown in Fig. 1.
2. Assemble the shaft into the main handle and ensure it is fully engaged.
3. Fix the handle into position by tightening the locking collar (Fig. 1).
FITTING THE DEBRIS GUARD
1. Align the debris guard with the trimmer head.
2. Secure the debris guard by tightening the 3 mounting screws with a screwdriver (Fig. 2).
ASSEMBLY
Fig. 1
The trimming line cut-off blade on the debris guard is sharp. When fitting the guard avoid contact with
the blade. Failure to avoid contact can result in serious personal injury.
WARNING
Fig. 2
Protrusion
Notch
Shaft Handle
Loading ...
Loading ...
Loading ...