Loading ...
Loading ...
Loading ...
29
EN
Whenever you want to use the machine
with remote control:
Make sure that the router is switched on
and connected to the Internet.
Fill the dishwasher, add detergent.
Turn on the dishwasher.
Press "PROGRAMME SELECTION/
REMOTE CONTROL" button for 3 secs.
The message "REMOTE CONTROL"
will appear on the display.
Close the door.
You can now check the machine from the
App.
To exit remote control, press
"PROGRAMME
SELECTION/REMOTE CONTROL"
button
again for 3 secs.
When no cycle is under way:
- The Wi-Fi indicator light will start to flash
slowly and the message "REMOTE
CONTROL OFF"
will appear on the display.
When a cycle is under way:
- The Wi-Fi indicator light will start to flash
slowly and the message
"REMOTE CONTROL
OFF" will appear on the display.
- The message "DOOR OPEN" will appear
on the display.
- The cycle will be completed without
control from the App.
Alternative way to exit remote control.
Press the "START/RESET" button for 3
secs
If there is a cycle under way, it will be
cancelled, and the machine will exit
REMOTE CONTROL mode.
The "Wi-Fi" indicator light will flash
slowly. It is now possible to set a new
wash cycle from the control panel.
Press the "ON/OFF" button for 3 secs
(or power off)
If there is a cycle under way, it will be
paused and the machine will exit
REMOTE CONTROL mode.
On switching on again, the "Wi-Fi"
indicator light will flash slowly and any
cycle under way will continue from the
point of interruption.
This indicator light indicates the connection
status:
- ON: remote control enabled.
-
FLASHING SLOWLY:
remote control disabled.
- FLASHING RAPIDLY FOR 3 SECONDS,
THEN OFF: the machine cannot connect
to the home Wi-Fi network or has not yet
been associated with the App.
- 3 SLOW FLASHES, THEN OFF FOR 2
SECONDS: reset of the Wi-Fi network
(during the association with the App).
- ON FOR 1 SECOND, THEN OFF FOR 3
SECONDS: the door is open, remote
control cannot be enabled.
"Wi-Fi" indicator light
Opening the door, any REMOTE
CONTROL will be disabled. To resume
control from the App, close the door.
If the appliance is switched off and
then on again -
either via the ON/OFF
button or as a result of a power failure
-
when REMOTE CONTROL is enabled
and a wash cycle is in progress, the
cycle will continue from the point of
interruption. In this case, "REMOTE
CONTROL" will be disabled.
DISABLING REMOTE CONTROL
ENABLING REMOTE CONTROL
Loading ...
Loading ...
Loading ...