Loading ...
Loading ...
Loading ...
27
EN
Enabling
1. Open the door.
2. Turn on the appliance using the
ON/OFF button.
3. Press the
"PROGRAMME SELECTION"
and "DELAY START" buttons together
for 5 seconds.
4. "DEMO MODE ON" will appear on the
display.
5. If no button is pressed for 30 seconds,
the programme will start, simulating the
start of a wash programme.
Disabling "Demo mode"
1. Open the door.
2. Turn on the appliance using the On/Off
button.
3. Press the
"PROGRAMME SELECTION"
and "DELAY START" buttons together
for 5 seconds.
4. "DEMO MODE OFF" will appear on the
display.
5. Switch off the appliance.
The dishwasher must ALWAYS be off
before you start this procedure.
WARNING
Once installed, if the appliance works
correctly but the wash cycle does not
start upon pressing the Start button,
"Demo mode" may not have been
disabled.
The PROGRAMME SELECTION./
OPTIONS/ DELAY START options are
enabled, and by pressing these buttons
you can simulate the product's
functioning without starting a wash.
The dishwasher must ALWAYS be off
before you start this procedure.
Enabling or disabling DEMO MODE
(be used exclusively in stores)
Loading ...
Loading ...
Loading ...